If you are going to be doing the do like me in computers, you will need to learn the very basics of computers. Dos is the simplest form of computing and so you will need to start from there. Introduction DOS (an acronym for Disk Operation System) is a tool which allows you to control the operation of the PC. DOS is software which was written to control hardware. IDRISI, Atlas*GIS, Microstation, AutoCAD, CPS/PC, and ARC/INFO are, in turn, application software which run under DOS. By this we mean that, although IDRISI, Atlas*GIS, Microstation, AutoCAD, CPS/PC, and ARC/INFO were written to accomplish a single task or application (in this case manipulation of spatially related data), they must use DOS to pursue its work. DOS can be used for a wide range of tasks far beyond the requirements of this class. You will be able to manage well if you master only a small subset of DOS commands and functions. These relate almost exclusively to file and directory management and are introduced in this lecture. This tip sheet assumes that you have learned how to turn on the PCs and that you have familiarized yourself with their keyboards (no small task in itself). It also assumes that you understand the meaning of the concept of a file and the elements of a file specification (drive, filename, and extension). The microcomputers you will be using are equipped with two floppy disk drives. You will quickly find that the best way to learn how to use a computer is through experimentation. That is, once you have learned a command, try some variations until they don't work, then start over. Often there are five or six ways for you to accomplish a particular task. Usually, I will introduce you to only one, leaving it up to you to discover the rest. Finally, don't be unduly disturbed by error messages. With computers, one of the best ways to learn is by making mistakes. Most of the common DOS commands you need to use for this class (copy, rename, delete) are available to you in Windows through the Filemanager icon. And, since you can move back and forth between DOS and Windows, it doesn't matter which option you employ. Some commands are faster in invoke in Windows, some in DOS. If you haven't worked with Windows previously, go to the Windows tutorials in the help area. Backup Files It is possible to lose files by mistake, although the more you practice the less likely it becomes. For your own peace of mind, it is good practice to make backup copies of your most valuable files on a separate diskette. Store your backup disk in a safe place and don't carry it through a metal detector. Use the COPY command to create the backup. There is no need to backup every file you create, only the ones in which you've invested much work. Also, prune your backup diskette every week or two using the ERASE command. Backup files which have been made redundant by subsequent additions will simply create clutter on your backup diskette. An effective file naming convention is essential to keeping track of your backups. Change the Default Drive To change the default drive, simply type the letter of the your choice. The new default will be listed in subsequent DOS prompts. Example: C> A: [enter] Changes the default drive from C to A. A> C: [enter] Changes the default drive from A to C. [enter] means that you must press the Enter Key before the format command will execute. [Enter] is required after any DOS command, it is assumed in all commands found below. CHDIR (CD) Change Directory Command Once you have located the directory you want, you may move from directory to directory using the CD command (change directory) Example: C> cd furniture Moves you to the directory called 'FURNITURE' C> cd \furniture\chairs Moves you to the directory called 'CHAIRS' under the directory called 'FURNITURE'. C> cd .. Moves you up one level in the path. C> cd \ Takes you back to the root directory (c: in this case). COPY Command The COPY command can be used both to copy files from disk to disk or to create a second copy of a file on a single disk. (There are many more uses of the COPY command, but only the basic operation is discussed here.) Example: C> copy c:kermit.exe a: Copies the file 'KERMIT.EXE' from the C drive to the A drive and gives it the same name. C> copy a:brazil1.dat b:\south\brazil2.dat Creates a copy of 'BRAZIL1.DAT' from drive A on drive B, putting it in the 'SOUTH' subdirectory and renaming it 'BRAZIL2.DAT'. The key to use this command correctly is to remember that the first file specified after the COPY command is the source file, the second is the target:ehp1 file. The source is the file to be copied. The target will be the location and name of the new file. If the file name and extension are omitted after the target's drive specification, the new file will have exactly the same name as the source file. Example: C> copy a:myfile.txt b: C> copy c:command.com b:com.com C> copy b:golly.gee a:whao.boy C> copy command.* a: C> copy a:mymap.dwg c:\maps Note: it is always good practice to us the complete file specifications for both source and target files, Be very sure of yourself before you accept defaults or employ wild-card characters. Otherwise you may end up with some interesting results. Incomplete or incorrect source names may result in errors, such as the command: copy edlin a:myomy.bat. Try it and see what happens. DIR (Directory) Command The DIRECTORY command lists the names and sizes of all files located on a particular disk. Example: C> dir a: Shows directory of drive A C> dir b: Shows directory of drive B C> dir \agis Shows files in a subdirectory on drive C (default) C> dir Shows directory of drive C C> dir /w Shows directory in wide format, as opposed to a vertical listing. C> dir /p Shows directory one window at a time, the PC will prompt you to continue. Very handy in viewing directories with many files, subdirectories or applications. All the files are listed at the screen, you can stop the display by typing CTRL-BREAK. If you ask for a directory on the A or B drives, be sure there is a diskette in the drive and that the diskette has been formatted. If the drive is empty, or if the diskette is unformatted, the DOS will respond with an error message. DIR Options Two little characters, '*' and '?', will make your life with computers much easier. Their use is illustrated below. Example: C> dir a:*.ex Lists all files on the A drive with an extension of 'EXE'. C> dir b:kermit.* Lists all files on the B drive with a filename of 'KERMIT'. The asterisk is a wild-card character which allows the user to enter only a limited part of a file specification to find a file. It is useful when you wish to locate a group of files with the same filename or the same extension. On other occasions you may have forgotten part of a file specification. You can use '*' in place of the parts of the specification you have forgotten. Similarly, '?' permits wild-card searches keyed to single characters. Example: C> dir a:labe?.com Lists all five-letter files with the first four letters 'LABE' and an extension of 'COM'. C> dir b:format.c?? Lists all files with a filename of 'FORMAT' and an extension beginning with 'C'. Wild-card characters can be used in combination. Example: C> dir a:labe?.* Lists all five-letter files with the first four letters 'LABE' and any extension. C> dir c:*.ex? Lists all files with an extension beginning with 'EX'. Experiment with '*' and '?' to improve your ability to find files quickly. These wild-card characters can also be used with several other DOS commands. ERASE Command The ERASE command deletes specified files. Example: C> erase a:myfile.txt Erases the file MYFILE.TXT from the diskette in the A drive. If no drive specification is entered, the system looks to delete the specified file form drive C (in this case). IMPORTANT WARNING: This command is easy to use, but it is the most dangerous one you will encounter in DOS (apart from FORMAT). If you aren't careful, you may delete a file which you--or someone else--needs. And, unless you have saved a backup of that file, the erased file is gone for good. For this reason it is good practice to use only complete file specifications with the ERASE command (and to keep backups of your most valuable files). As a safety precaution, never use the wild-card characters '*' and '?' in ERASE commands. BEWARE: You will completely erase your harddrive and will have to reformat your computer if you ever use either the command: erase c:*.*, or the command: erase *.*. Guess what happens? File-Naming Conventions Careful file naming can save time. Always choose names which provide a clue to the file's contents. If you are working with a series of related files, use a number somewhere in the name to indicate which version you have created. This applies only to the filename parameter; most of the file extension parameters you will be using are predetermined (or reserved by DOS for certain types of file). Example: WORLD.DAT An ATLAS*GRAPHICS file containing data for a world map. The DAT extension is required by ATLAS*GRAPHICS. BRAZIL.BNB A boundary file of Brazil in binary form. BRIT1.DAT BRIT2.DAT BRIT3.DAT Three versions of a data file for a map of Britain. FORMAT Command You must format new disks before using them on the IBM computers. The format command checks a diskette for flaws and creates a directory where all the names of the diskette's files will be stored. Example: C> format a: Formats the diskette in the A drive. C> format b: After entering this command, follow the instructions on the screen. When the FORMAT operation is complete, the system will ask if you wish to FORMAT more diskettes. If you are working with only one diskette, answer N (No) and carry on with you work. If you wish to FORMAT several diskettes, answer Y (Yes) until you have finished formatting all your diskettes. BEWARE: Executing the format command with a diskette which already contains files will result in the deletion of all the contents of the entire disk. It is best to execute the format command only on new diskettes. If you format an old diskette make sure it contains nothing you wish to save. MKDIR (MD) Make Directory Command This command creates a new directory. Example: C> mkdir mine Creates a directory called 'MINE' Rebooting the computer (Ctrl-Alt-Del) In some cases, when all attempts to recover from a barrage of error messages fails, as a last resort you can reboot the computer. To do this, you press, all at once, the control, alternate and delete. BEWARE: If you re-boot, you may loose some of your work--any data active in RAM which has not yet been saved to disk. RENAME (REN) Command The RENAME command permits users to change the name of a file without making a copy of it. Example: C> ren a:goofy.txt pluto.txt Changes the name of 'GOOFY.TXT' on the A drive to 'PLUTO.TXT'. This command is very simple to use, just remember two points: the file name and extension must be complete for the source file and no drive specification is given for the target. Renaming can only occur on a single disk drive (otherwise COPY must be used). RMDIR (RD) Remove Directory Command This command removes a directory. It is only possible to execute this command if the directory you wish to remove is empty. Example: C> rd mine Removes directory called 'MINE'. Stop Execution (Ctrl-Break) If you wish to stop the computer in the midst of executing the current command, you may use the key sequence Ctrl-Break. Ctrl-Break does not always work with non-DOS commands. Some software packages block its action in certain situations, but it is worth trying before you re-boot.